DS-3E1326P

Metal material

2.83 kg (6.24 lb)

3.8 kg (8.38 lb)

440.00 mm × 44.00 mm × 220.80 mm (17.32" × 1.73" × 8.69")

0°C to 45°C (0°F to 113°F)

-40°C to 85°C (-40°F to 185°F)

5% to 95% (no condensation)

5% to 95% (no condensation)

100-240 VAC, 50/60 Hz, Max. 6.3 A

Rack (equipped with mounting ears)

400 W

30 W

6 kV

24 × 10/100 Mbps PoE port, 2 × Gigabit combo

16 K

Whole-Device Performance: 14.8 Gbps; Port Performance: 8.8 Gbps

Whole-Device Performance: 11.01 Mpps; Port Performance: 6.55 Mpps

4 Mbits

Ports 1 to 24: up to 300 m. Long range performance may vary depend on camera model or cable condition.

Ports 1 to 8: data on VIP ports is preferentially forwarded when bandwidth resources are insufficient.

Ports 1 to 24: port isolation mode to improve network security; Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.

Ports 1 to 24: auto detect and restart the cameras that do not respond.

Link aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection. Support static link aggregation. Support 1 aggregation group(s).

QoS is used to allocate bandwidth to different services so as to provide end-to-end service quality assurance. Support port-based priority configuration. Support SP, WRR priority schedule mode.

Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default. Support 802.1D STP. Support 802.1w RSTP.

VLAN is used for network scale planning and network health improvement. Support 802.1Q. Configurable VLAN ID from 1-4094. Support Trunk, Access port mode. Support Max. 4094 VLAN.

Support one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display the PoE power usage. 4. Display topology information. 5. Display the alarm status. 6. Restart ports and devices. 7. Enable port long-rage mode. 8. Remotely upgrade the device.

Support device management via web. Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses. Support Super IP, which is a fixed IP address (10.180.190.200) for direct access. Support management via Hik-Central Pro. Support remote management via Hik-Partner Pro. Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected. Supports 802.1ab LLDP for peer device discovery. Support port mirroring for fault locating.

IEEE 802.3af, IEEE 802.3at

8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)

PoE: Ports 1 to 24

30 W

370 W

CE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020), IC (ICES-003: Issue 7:2020), RCM (AS/NZS CISPR 32: 2015)

CB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition)), CE-LVD (EN 62368-1: 2014+A11: 2017)

CE-RoHS (2011/65/EU), WEEE (2012/19/EU), Reach (Regulation (EC) No.1907/2006)